CR, CRE, CRN, CRNE, CRI, CRIE, CRT, CRTE

Beskrivelse

Beskrivelse

Det grundlæggende CR-pumpeprogram, som kan anvendes i næsten alle industrielle løsninger, er i sig selv vores bredeste program. Modulkonstruktionen gør det blot endnu bredere.

Det grundlæggende CR-pumpeprogram kan leveres i fire forskellige materialer: støbejern, to kvaliteter af rustfrit stål samt 100 % titanium. Der er 13 flowstørrelser, som kan skabe tryk på op til næsten 50 bar, samt et stort udvalg af akseltætninger, gummimaterialer og forsyningsspændinger.

Pumpedele, som typisk er sårbare over for vanskelige medier eller særligt krævende driftsbetingelser, kan optimeres til det specifikke formål og konstrueres til særlige krav.

CRE
Den velkendte CRE-pumpe fås nu også med den nye MGE-motor, som er 100 % skræddersyet til pumpen. MGE-motoren leverer, som den eneste på markedet i øjeblikket, en virkningsgrad, der er højere end IE4-niveauet - inklusive effekttabet fra frekvensomformeren.

Resultatet er en helhedsorienteret og ekstrem energieffektiv løsning, som yder større driftssikkerhed og optimal driftsstyring CRE-pumpen kan let opkobles til kommunikation med SCADA- og BMS-systemer.
Læs mere om løsningen under fanebladet 'Brochurer'.

Anvendelse
CR-pumper udgør et komplet program af pumpeløsninger til alverdens anvendelsesformål – såvel i virksomheder som i private hjem. Følgende er eksempler på anvendelsesformål:

  • Procesvandsanlæg
  • Vaske- og rengøringsanlæg
  • Havvandsanlæg
  • Pumpning af syrer og baser
  • Ultrafiltreringsanlæg
  • Omvendt osmose-anlæg
  • Svømmehaller.

Funktioner og fordele

  • Driftssikkerhed
  • Høj virkningsgrad
  • Servicevenlig
  • Pladsbesparende
  • Egnet til lettere aggressive medier
  • Høj korrosionsbestandighed
  • Enkeltpumpeløsning, der giver mulighed for højt tryk.

    Facebook Twitter LinkedIn

Fordele

  • Overlegen driftssikkerhed
  • Energiøkonomi
  • Driftssikkerhed og ydelse
Brochurer

Brochurer

 

CR – produktbrochure

CR Innovation Inside (System & Concept brochure)

The CR concept

Grundfosliterature-145810.pdf (2 MB)

CRE GRUNDFOS - Intelligent Efficiency by Grundfos

GRUNDFOS CRE - INTELLIGENT EFFICIENCY BY GRUNDFOS (Product brochure)

The renowned CRE pump has been upgraded with the latest motor technology to offer impressive energy efficiency that exceeds the IE4 levels, even including the energy consumption of the variable frequency drive.

Grundfosliterature-5133461.pdf (4 MB)

CRE, CRIE, CRNE - MGE motor update

CRE, CRIE, CRNE (MGE motor update) (Data Sheet)

The new MGE represents a new way of thinking about speed-controlled motors when it comes to efficiency. The total efficiency of this new motor, including the frequency converter, is higher than the IE4 level defined by the IEC 60034-31, even though this standard only applies to the motor. This will make the MGE unique for its class when it comes to efficiency.

Grundfosliterature-5235329.pdf (361 KB)

CR – produktbrochure

Customised solutions (Product brochure)

The basic CR and NBG/NKG pump ranges, which apply to almost any industrial solution, constitute the broadest range available. With our modular approach, we have made them even broader.

Grundfosliterature-1973.pdf (3 MB)

CRT – Grundfos titaniumpumper

Grundfos Titanium pumps (Product brochure)

CR Titanium pumps are an outstanding element in the well-proven Grundfos CR range of pumps. In Grundfos CRT pumps, all the components that can come in contact with the pumped liquid are made of titanium.

Grundfosliterature-1891257.pdf (203 KB)

CRN – MAGdrive

CRN MAGdrive (Product brochure)

Leaflet with information of CRN MAGdrive, which is used when pumping dangerous and aggressive liquids.

Grundfosliterature-2054.pdf (1 MB)

CRN – luftkølet top

CRN Air-Cooled Top (Product brochure)

Air-cooled Top: The Grundfos CRN Air-Cooled Top is specially designed to handle hot liquids; i.e. 120 °C - 180 °C. To make sure that the liquid temperature around the shaft seal does not exceed the level it can withstand, the pump is fitted with a special air-cooled shaft seal chamber generating the same insulation effect as the one of a thermos. To cool the pump, no external cooling is necessary; the ambient temperature is sufficient.

Grundfosliterature-2047.pdf (594 KB)

CR – ATEX-godkendte CR-pumper

ATEX approved CR pumps (Product brochure)

The ATEX approved CR pumps and motors carry a mark that shows which explosion category the pumps are designed for, and thus, in what kind of areas they can be used. The directive distinguishes between two explosion groups; group I and II. Whether it is a group I or II pump, depends on the level of danger of explosion in the area in which the CR pump is installed.

Grundfosliterature-2056.pdf (126 KB)

CRN – højtryksprogram

CRN high pressure programme (Product brochure)

Leaflet with information of the CR high pressure programme for applications, in which high pressures are decisive for a successful daily production.

Grundfosliterature-2052.pdf (445 KB)

CR – Grundfos LiqTec

Grundfos LiqTec (Product brochure)

Leaflet with information of the Grundfos LiqTec - dry running protection.

Grundfosliterature-2055.pdf (224 KB)

CRN – lavt holdetryk

CRN Low NPSH (Product brochure)

Leaflet with information of CRN Low NPSH - a pump specially designed to eliminate the risk of cavitation and ensure reliable operation.

Grundfosliterature-2053.pdf (645 KB)

CRN – medicinsk

CRN Pharmaceutical (Product brochure)

CRN for pharmaticeutical applications

Grundfosliterature-1769865.pdf (194 KB)

CRT – til afsaltning

CRT for desalination (Product brochure)

In Grundfos CRT pumps, all components in contact with the pumped liquid are made of titanium

Grundfosliterature-1891258.pdf (204 KB)

CRT til industri

CRT for industry (Product brochure)

In Grundfos CRT pumps, all components in contact with the pumped liquid are made of titanium

Grundfosliterature-1891255.pdf (270 KB)

CRT til havvand

CRT for sea water (Product brochure)

In Grundfos CRT pumps, all components in contact with the pumped liquid are made of titanium

Grundfosliterature-1891256.pdf (227 KB)

Kundetilpassede pumpeløsninger

CUSTOMISED PUMP SOLUTIONS - Optimised for steam boiler feed (Product brochure)

Optimised for steam boiler feed

Grundfosliterature-2123624.pdf (2 MB)

CR – bærehoved

CR pulley head (Product brochure)

Leaflet with information of the CR pulley head for applications in remote areas or in mobile applications where no electric power is available.

Grundfosliterature-2049.pdf (119 KB)

CR Monitor

GRUNDFOS CR MONITOR, Intelligent warning (Product brochure)

GRUNDFOS CR MONITOR, Intelligent warning

Grundfosliterature-1563858.pdf (864 KB)

Entreprenørens pumpeguide

Entreprenørens pumpeguide (Produkt brochure)

En guide til entreprenøren, nem oversigt med udgangspunkt i opgavens karakter

Grundfosliterature-5565324.pdf (8 MB)

Cases

Cases

Service
Kontakt
Salg

Kontakt

Brug venligst nedenstående fomular.


Telefon

87505054
Service

Contact us

Select country to contact your local sales company


Telefon

+ 45 87 50 50 50

Adresse

Center Vest:
Martin Bachs Vej 3
8850 Bjerringbro

Center Øst:
Vallensbækvej 30-32
2605 Brøndby